control system
Printed From: One Stop GATE
Category: GATE Technical Discussions
Forum Name: GATE ECE
Forum Discription: General Technical Discussions, Queries, doubts etc. for GATE in ECE.
URL: http://forum.onestopgate.com/forum_posts.asp?TID=210
Printed Date: 12Feb2025 at 1:20pm
Topic: control system
Posted By: Kishor
Subject: control system
Date Posted: 03Feb2007 at 11:54am
http://forum.gatementor.com/viewtopic.php?p=15546#15546"> Posted: Wed Jan 31, 2007 4:09 am Post subject: control system |
http://forum.gatementor.com/posting.php?mode=quote&p=15546"> |
|
1. for making an unstable system stable
(a) gain of the system should be incerases
(b) gain of the system should be decerases
(c) the number of zero to the loop transfer should be increases
(d) the number of poles to the loop transfer should be increases
2.non minimum phase transfer function is defined as the transfer function
(a) which has zeros in right half S plane
(b) which has zeros only in left half S plane
(c) which has poles in right half S plane
(d) which has poles in left half S plane
3.An advantage of memory interlacing is that
(a) a large memory is obtaind
(b) effective speed of the memory is increased
(c) the cost of the memory is reduced
(d) in an voltatile memory is obtained
4.Feed back control system are basically
(a) lowpass filters
(b) high pass filters
(c) band pass filters
(d) band stop filters |
|
Replies:
Posted By: Anjan
Date Posted: 03Feb2007 at 12:39pm
|