![]() |
![]() ![]() ![]() ![]() ![]() |
![]() ![]() |
![]() |
![]() |
![]() ![]() |
Author | Message |
Neha Agarwal
Groupie ![]() Joined: 04Jan2007 Online Status: Offline Posts: 59 |
![]() ![]() ![]() Posted: 05Jan2007 at 4:39pm |
1. The observed value of the standard penetration number (N) at 10m depth of a siltysand deposit is 13. The unit weight of the soil is 16 kN/in 3.The N value after correcting for the presence of fines will be: (A) 12 (B) 13 (C) 14 (D) 15
2.The force 'F' required at equilibrium on the semi-cylindrical gate shown below is:
3.Velocity distribution in a boundary layer flow over a plate is given by (u/u m) = 1.5 h - 0.5 h 3 J where, h = y/ d ; y is the distance measured normal to the plate; d is the boundary layer thickness; and U m is the maximum velocity at y = d . If the shear stress t , acting on the plate is given by t =K( m u m)/ d where, m is the dynamic viscosity of the fluid, K takes the value of:
(C) 1.5 (0) none of the above
4.A 6-hour Unit Hydrograph (UH) of a catchment is triangular in shape with a total time base of 36 hours and a peak discharge of 18 m 3 /s. The area of the catchment (in sq. km) is:
5.When there is an increase in the atmospheric pressure, the water level in a well penetrating in a confined aquifer:
6.In a domestic wastewater sample, COD and BOD were measured. Generally which of the following statement is true for their relative magnitude?
7.In disinfection, which of the following forms of chlorine is most effective in killing the pathogenic bacteria?
8.A Trickling filter is designed to remove:
9.In natural water, hardness is mainly caused by:
along the direction of traffic
12. Stopping sight distance and frictional co-efficients are
|
|
For more papers visit:
http://onestopgate.com/gate-preparation// Post Resume: Click here to Upload your Resume & Apply for Jobs |
|
![]() |
|
![]() ![]() |
||
Forum Jump |
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
|
© Vyom Technosoft Pvt. Ltd. All Rights Reserved.