One Stop GATE Forum: 2004- year ECE GATE Paper

Message


   
1.  The  impurity  commonly  used  for  realizing  the  base  region  of  a  silicon  n-p-n 
    transistor is 
    (a)  Gallium  (b)  Indium  (c)  Boron  (d) Phosphorus 

2.  If for  a silicon n-p-n  transistor, the base-to-emitter voltage (VBE) is 0.7V and the 
    collector-to-base voltage (VCB ) is 0.2V, then the transistor is operating in the 
    (a)  normal active mode    (b)  saturation mode 
    (c)  inverse active mode   (d)  cutoff mode 


3.   An ideal op-amp is an ideal 
    (a)  voltage controlled current source  (b)  voltage controlled voltage source 
    (c)  current controlled current source  (d)  current controlled voltage source 
 
4.  Voltage series feedback (also called series shunt feedback) results in 
    (a)  increase in both input and output impedances 
    (b)  decrease in both input and output impedances 
    (c)  increase in input impedance and decrease in output impedance 
    (d)  decrease in input impedance and increase in output impedance 


5.  master slave flip-flop has the characteristic that 
    (a)  change in the input immediately reflected in the output 
    (b)  change in the output occurs when the state of the master is affected 
    (c)  change in the output occurs when the state of the slave is affected 
    (d)  both the master and the slave states are affected at the same time 
 
6.  The  range  of  signed  decimal  numbers  that  can  be  represented  by  6-bite  1‘s 
    complement number is 
    (a)  -31 to +31  (b)  -63 to +64  (c)  -64 to +63  (d) -32 to +31 


7.   A  digital  system is  required  to  amplify  a  binary-encoded  audio  signal.  The         user should be able to control the gain of the amplifier from a minimum to a maximum 
     in  100  increments.  The minimum  number  of  bits  required to  encode, in straight 
     binary is 
     (a)  8  (b)  6  (c)  5  (d) 7

Author	Message
Priya Groupie Joined: 04Jan2007 Online Status: Offline Posts: 82	Topic: 2004- year ECE GATE Paper Posted: 14Feb2007 at 5:04pm
	1. The impurity commonly used for realizing the base region of a silicon n-p-n transistor is (a) Gallium (b) Indium (c) Boron (d) Phosphorus 2. If for a silicon n-p-n transistor, the base-to-emitter voltage (VBE) is 0.7V and the collector-to-base voltage (VCB ) is 0.2V, then the transistor is operating in the (a) normal active mode (b) saturation mode (c) inverse active mode (d) cutoff mode 3. An ideal op-amp is an ideal (a) voltage controlled current source (b) voltage controlled voltage source (c) current controlled current source (d) current controlled voltage source 4. Voltage series feedback (also called series shunt feedback) results in (a) increase in both input and output impedances (b) decrease in both input and output impedances (c) increase in input impedance and decrease in output impedance (d) decrease in input impedance and increase in output impedance 5. master slave flip-flop has the characteristic that (a) change in the input immediately reflected in the output (b) change in the output occurs when the state of the master is affected (c) change in the output occurs when the state of the slave is affected (d) both the master and the slave states are affected at the same time 6. The range of signed decimal numbers that can be represented by 6-bite 1‘s complement number is (a) -31 to +31 (b) -63 to +64 (c) -64 to +63 (d) -32 to +31 7. A digital system is required to amplify a binary-encoded audio signal. The user should be able to control the gain of the amplifier from a minimum to a maximum in 100 increments. The minimum number of bits required to encode, in straight binary is (a) 8 (b) 6 (c) 5 (d) 7
	For More Sample Papers Visit: http://onestopgate.com/gate-preparation/ Post Resume: Click here to Upload your Resume & Apply for Jobs

	IP Logged


One Stop GATE Forum : GATE Previous Years Test Papers - Discuss Here : ECE Papers